Introduction
MS® CA syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. MS® CA Syringe filters are suitable for the filtration of aqueous solutions. Cellulose Acetate combine high flow rates and thermal stability with very low absorption characteristics. Especially 0.22μm pore size CA Membrane excellently suited for sterilization aqueous solutions, buffers, sera and media.
PDF [ 6 Page / 1.004kb]
Features
- Naturally hydrophilic membrane filter
- Low protein binding: suitable for aqueous protein solutions
- Nitrate free: suitable for groundwater filtration
- Quiet uniform pore size structure
- Extensive pore size specification
- Cell retention and particle collection
Applications
- Filtration for aqueous sample and some organic solvents
- Cell Retention for liquid
- Light Scattering Measurement
- Sterilization
Technical Specification
| Technical Parameters of CA Syringe Filter |
| Diameter | 13mm | 25mm | 33mm |
|---|
| Housing Material | Polypropylene |
|---|
| Membrane Material | Cellulose Acetate |
|---|
| Pore Size | 0.2μm / 0.45μm |
|---|
| Thickness | 110±10μm |
|---|
| Absorption | Small adsorption |
|---|
| Bubble Point (Water) | 0.2μm: 340kpa, 0.45μm: 220kpa |
|---|
| Chemical Compatibility | Stable among pH 3-7, better hydrophilicity, great water Flux and better cutoff effect |
|---|
| Extractable with water | < /> |
|---|
| Flow Rate(Water)△P 100Kpa | 0.2μm: 23mL/min/cm2, 0.45μm: 46ml/min/cm2 |
|---|
| Maximum Operating Pressure(psi) | 87 |
|---|
| Maximum Temperature | ≤ 50℃ |
|---|
| Inlet Connection | Female luer lock | Female luer lock | Female luer lock |
|---|
| Outlet Connection | Male Slip luer | Male Slip luer | Male Slip luer |
|---|
| Packing | Sterile/ No Sterile | Sterile/ No Sterile | Sterile/ No Sterile |
|---|